Flex Grafalloy

I took a club to go to kiss and told me to cut the flex in the shaft?

I received a Grafalloy shaft put in. I thought you just buy a regular tree flexible or rigid, but the manufacturer says that short-adhesive flexible shaft you want. Is he right? Whenever I Bought the clubs say stiff or regular shaft.

The bending of a club is determined by 2 things - first, of course, is the rigidity of the shaft. However, the weight of the head also helps. Iron Trees As an example, although the same principle applies to most trees Wood. Most trees are manufactured in a cast for approximately 40 centimeters. The outer diameter of 600 inches starts backwards (grip) end and decreases to 370 inches at the tip (head) end, with the last inch shaft measured 370 ". Now, each iron head is heavier than Longest Previous - 7 more than 6 heavy, heavier 6 5, etc. to get the same flex for each club, you must cut an additional amount beyond the end each axis, based on the axis of the manufacturers reccomendations. After cutting the stock to obtain the desired club length. Clubmakers experienced are often able to adjust the amount of cutting the tip to change the final flex of the club. To make the club more rigid or more flexible, cutting the upper end or below the reccomendations. I did this with most clubs in my bag. It is common practice, so I do not I wish I worry about.